IronRidge BX System Flat Roof Mounting Hardware Kit w/ L Feet, BX-MA-FRA-M1
Note: Strut Channel is not included in the kit and is sold separately.
The Attachment Kit uses an 8′ minimum Strut Channel to span across two Chassis and an FRA Anchor in order to anchor the Chassis to the roof. Secure L-Feet onto the Chassis by installing the Carriage Bolt and Square Washer from the underside of each Chassis through the reference hole. Torque Flange Nut to 120 in-lbs.
Assemble an L-Foot onto the Flat Roof Attachment and flashing membrane (where applicable) using the 3/8” Bolt and Flat Washer torqued to 250 in-lbs. Then, install L-Foot and Flat Roof Attachment assembly at the Strut Channel midpoint using the provided 3/8″ Bolt with a 1-1/4″ washer to a galvanized Channel Nut (as before) torqued to 250 in-lbs.
Material: Aluminum – Mill Finish / Stainless Steel
Product type: Ballast
Application: Flat Roof – Ballast
Dimensions: 1.92 in (length) × 1.88 in (width) × 3 in (height)
Weight: 4.5 lb